View previous topic :: View next topic |
Author |
Message |
JeremyC Gold Cloverleaf
Joined: 06 Sep 2008 Posts: 583 Location: Petersfield, Hampshire
|
Posted: Mon Oct 24, 2011 9:05 am Post subject: Screen wash reservoir access |
|
|
Please tell me I don't have to remove a wing to get to the screen wash reservoir.
How do I get to it, I seem to have a leak and the blooming thing keeps emptying itself. _________________ '93 Black 33 1.7 16v |
|
Back to top |
|
![](templates/subRed/images/spacer.gif) |
BigAl P4
![](images/avatars/6308160254d7a598b67c68.jpg)
Joined: 06 May 2003 Posts: 2992 Location: U.K Surrey
|
Posted: Mon Oct 24, 2011 1:14 pm Post subject: |
|
|
Hey JC,
You should be able to get to it by removing the plastic wheel liner.
There is a 10mm nut on the inside of the enginebay near the top of the wing and one further down that holds the bracket for the wing and bumper.
Leaks usually come from the join in the pipes. _________________ x2 33 16v
pictures http://www.alfa-pages.co.uk/viewtopic.php?t=5203 |
|
Back to top |
|
![](templates/subRed/images/spacer.gif) |
JeremyC Gold Cloverleaf
Joined: 06 Sep 2008 Posts: 583 Location: Petersfield, Hampshire
|
Posted: Mon Oct 24, 2011 1:26 pm Post subject: |
|
|
Thanks Al, sounds a relatively easy job. _________________ '93 Black 33 1.7 16v |
|
Back to top |
|
![](templates/subRed/images/spacer.gif) |
BigAl P4
![](images/avatars/6308160254d7a598b67c68.jpg)
Joined: 06 May 2003 Posts: 2992 Location: U.K Surrey
|
Posted: Mon Oct 24, 2011 1:35 pm Post subject: |
|
|
There might be a 8mm bolt under the bumper holding the plastic wheel liner in place, there is a bolt on the bracket from the engine bay to the wing/bumper holding the bottle in place. all the 10mm nuts have captive nuts, before removing anything i would lube them all up and let them soak and have spare captive nuts, when replacing use waxoil on them.
The bottle is quite heavy when full, have you checked to see where its leaking? _________________ x2 33 16v
pictures http://www.alfa-pages.co.uk/viewtopic.php?t=5203 |
|
Back to top |
|
![](templates/subRed/images/spacer.gif) |
JeremyC Gold Cloverleaf
Joined: 06 Sep 2008 Posts: 583 Location: Petersfield, Hampshire
|
Posted: Mon Oct 24, 2011 1:53 pm Post subject: |
|
|
No not investigated at all but I'm gettting nothing out and when I fill, it all runs out of the bottom of the car.
I'm going to get the car into the garage on Sunday to do a gearbox oil change so I'll investigate then. _________________ '93 Black 33 1.7 16v |
|
Back to top |
|
![](templates/subRed/images/spacer.gif) |
john 33_16v 16 Valve
![](images/avatars/19060450664b72e2a31a610.gif)
Joined: 27 May 2005 Posts: 1406 Location: herts, uk
|
Posted: Mon Oct 24, 2011 2:05 pm Post subject: |
|
|
The pumps can leak which can be seen when the wing liner is out.
I think the pump/s are shared with 75 and possibly 164
John _________________ If it aint broke, fiddle with it until it is!
- - - - - - - - - - - - - -
93 33 16v Mirtle Met
08 Fiat Grande Punto Exotica Red
90 Yamaha FZR600 Genesis- Silky white/red/blue |
|
Back to top |
|
![](templates/subRed/images/spacer.gif) |
BigAl P4
![](images/avatars/6308160254d7a598b67c68.jpg)
Joined: 06 May 2003 Posts: 2992 Location: U.K Surrey
|
|
Back to top |
|
![](templates/subRed/images/spacer.gif) |
JeremyC Gold Cloverleaf
Joined: 06 Sep 2008 Posts: 583 Location: Petersfield, Hampshire
|
Posted: Wed Nov 02, 2011 10:40 pm Post subject: |
|
|
No too busy with the roof leak plus Saturday our with some chums visiting the Army museum in Chelsea plus Sunday morning with messrs Vettel, Button and Alonso.
Hopefull this weekend I'll do engine and gearbox oil changes plus the washers. _________________ '93 Black 33 1.7 16v |
|
Back to top |
|
![](templates/subRed/images/spacer.gif) |
BigAl P4
![](images/avatars/6308160254d7a598b67c68.jpg)
Joined: 06 May 2003 Posts: 2992 Location: U.K Surrey
|
|
Back to top |
|
![](templates/subRed/images/spacer.gif) |
|