| View previous topic :: View next topic |
| Author |
Message |
Alex_Alfa33
Alfasud
Joined: 11 May 2007
Posts: 41
Location: Essex, Nr Chelmsford
|
 Posted: Wed Oct 01, 2008 7:16 pm Post subject: Wanted: Alfa 33 1.7 16v Heads, Crossmember and Sump |
 |
|
Looking for a set of 1.7 16v heads to put on my 8v block.
Apparently i will also need a 16v sump n crossmember.
Thinking about it i will probably need the pulleys as well or can i use 8v pulleys, as i have a few verniers.
If anyone can help, i would appreciate it.
_________________
 |
|
| Back to top |
|
 |
paulhide
P4
Joined: 20 Dec 2003
Posts: 1607
Location: Oh Beautiful Billingham
|
| Posted: Wed Oct 01, 2008 9:56 pm Post subject: |
|
|
I got heads and sump. Prob. got cross member - can check. No pulleys on camshafts though, but practically new tensioners and belts. I take it you're going to want the sump-head corrugated oil channels aswell.
_________________
Owner's Club 33 Registrar. Now from P4 & S2 1.7 QV
http://www.alfa-pages.co.uk/viewtopic.php?t=5188 |
|
| Back to top |
|
|
BigAl
P4
Joined: 06 May 2003
Posts: 2992
Location: U.K Surrey
|
| Posted: Thu Oct 02, 2008 11:25 am Post subject: |
|
|
Hey Alex, I thought that you needed to get the pistons milled out to accommodate the valves, like the 16v pistons are naturally, but then I heard about some guy that did what you are trying and didn’t have to, have you checked?
_________________
x2 33 16v
pictures http://www.alfa-pages.co.uk/viewtopic.php?t=5203 |
|
| Back to top |
|
|
Alex_Alfa33
Alfasud
Joined: 11 May 2007
Posts: 41
Location: Essex, Nr Chelmsford
|
| Posted: Thu Oct 02, 2008 11:36 pm Post subject: |
|
|
| paulhide wrote: |
| I got heads and sump. Prob. got cross member - can check. No pulleys on camshafts though, but practically new tensioners and belts. I take it you're going to want the sump-head corrugated oil channels aswell. |
oh cool, that was quick. How much do you want for them? Yeah i think i will need the oil channels as well. 
_________________
|
|
| Back to top |
|
|
Alex_Alfa33
Alfasud
Joined: 11 May 2007
Posts: 41
Location: Essex, Nr Chelmsford
|
| Posted: Thu Oct 02, 2008 11:39 pm Post subject: |
|
|
| BigAl wrote: |
| Hey Alex, I thought that you needed to get the pistons milled out to accommodate the valves, like the 16v pistons are naturally, but then I heard about some guy that did what you are trying and didn’t have to, have you checked? |
Im not going to be using the standard 8v pistons. Going to get some new forged ones to fit, so shouldnt be a problem, fingers crossed lol.
_________________
|
|
| Back to top |
|
|
|
