Matt Stolton
Alfa Sprint
Joined: 14 Mar 2003
Posts: 233
Location: London
|
 Posted: Wed Apr 07, 2004 1:31 am Post subject: Game on |
 |
|
After approximately 18 months, the heads are finally back for my P4 project!!!!!!!!!!!!
If any one is passing Clovertech, if you could pop in and make sure Lloyd is working on rebuilding the engine, it would be appreciated 
All we have to do now, is part build to check piston/head clearances, pocket the pistons to suit, full engine proper build, induction, exhaust, reconnect P4 transmission and then its off for MOT. If only it is going to be that easy....
Any how, I will get some pictures up as soon as the boss remembers to bring in the cable for the digi camera...
Looking good so far, any way. For a laugh, based on the new valve sizes and breathing arrangement, if it spins to about 10 000 rpm, mathematically 240BHP is possible!!!
I think I will just be happy to get it to the MOT station some time this spring. Still hoping for 180BHP from around 7500 rpm though 
_________________
Regards
Matt
Ex Alfa 33 'GTA' (P4 with Knobs On)
Now cruising in a 166 3.2 Ti!! |
|
