Alfa Pages

paulhide · Posted: Tue May 13, 2008 10:03 am Post subject: HALF PRICE SALE LIST

Had a quick rummage through part of the garage and came up with this lot. There is also loads more! Could take some of the smaller items to Stanford park/NAD/AutoItalia on June 1st.
Sud console £5
Sud rear lights (red/white) £5 pair
Sprint console £5
Series 1 33 console £5
Series 2 33 console £10
Permanent 4 console £15
Permanent 4 gearbox £100
Permanent 4 fuel tank £60
Gearbox reverse light switch £5
Triple air vent £5
Nearly new water pump £10
Complete Recaro interior with slight cloth damage in one area on drivers seat £100
Complete Series 2 green cloverleaf interior £30
16v idle valve £5
16v AFM £10
16v distributor £5
16v air inlet manifold £5
16v engine bay strengthening arms £5
P4 alloys £15 each
Power steering pump + tubing £25
Series 3 headlights (no indicator) £15 each
Series 3 Rear light £5
Series 3 Bonnet £20
Series 3 Doors £20 each
Series 3 Hatch £20
Series 3 Wings £15
Series 3 Spoiler £20
Series 3 Front grill £5
Series 3 Alternator £20
Series 3 Starter motor £20
Series 3 Sunroof £40
Series 3 Radiator £10

Series 1/2 1.7 front and middle exhaust £30
Series 1/2 carburettor – engine manifolds £20 pair
Series 1/2 carburettor – airbox manifolds £10
Series 1/2 airbox £5
Series 1/2 bonnet £20
Series 2 Doors £20 each
Series 1/2 Hatch £20
Series 1/2 Wings £15
Series 1/2 Front bumper £20
Series 1/2 Alternator £5
Series 1/2 Radiator £10
Series 2 Front grill £5
Series 2 Rear light £5
Series 1/2 Front cross member £15
Series 1/2 Anti-roll bar £15
Series 1/2 Starter motor £10
Series 1/2 Expansion tank £5
Series 1/2 +ve battery lead £5
Series 1/2 Plastic breather/vacuum pipe connector £10
Series 1/2 Front veloce bumper – requires some attention £20
Sportswagon hatch £10
Sportswagon vinyl parcel shelf £30
Brake disc shield £5
And loads loads more.
_________________
Owner's Club 33 Registrar. Now from P4 & S2 1.7 QV
http://www.alfa-pages.co.uk/viewtopic.php?t=5188

bobbber · Posted: Tue May 13, 2008 2:00 pm Post subject:

Guys... are we paying attention here? This is the potential destruction of a large load of kit we could *all* need in the future. Could be an integral part of keeping the 33s going in this country.

Paul... what's happening to all this stuff? Do we need to float some "shares" to pay for storage?

Bob
_________________
Fiat Bravo 165 Sport

paulhide · Posted: Tue May 13, 2008 7:15 pm Post subject:

Hi Bobbber the property thing here is looking a bit shaky at the moment and if it all falls through I will need every penny I can get and will have nowhere to store this stuff. I may even have to sell my P4? Alex Poulter is selling loads of stuff at high prices so I thought I'd make everyone aware of what is here. Soon spares will get very sparse as we are rapidly running out of cars. Maybe less than 200 on the road and a similar number SORN rapidly decreasing.
_________________
Owner's Club 33 Registrar. Now from P4 & S2 1.7 QV
http://www.alfa-pages.co.uk/viewtopic.php?t=5188

ceci · Alfa Arna Joined: 17 Apr 2008 Posts: 15

i am interested in the p4 gearbox but i only need the p4 part (emc)
how much to ship to australia?

thanks greg

paulhide · Posted: Sun May 18, 2008 11:27 am Post subject:

I've also got someone asking me how much to ship to Lithuania Exclamation

To tell you how much to ship to Australia I would have to take it apart to find out how much just the P4 bit weighs.
Anyone know how much it would weigh?
_________________
Owner's Club 33 Registrar. Now from P4 & S2 1.7 QV
http://www.alfa-pages.co.uk/viewtopic.php?t=5188

ceci · Alfa Arna Joined: 17 Apr 2008 Posts: 15

i understand the dilema.............but weigh the whole box and halve the result that should be close enough.
when you get a quote please let me know.
thankyou

baldy · Alfasud Joined: 23 Jan 2006 Posts: 67

Hi paul,do you have a good expansion tank and cap as i had a mishap with mine and damaged it!!! need to replace it quick. cheers lee

paulhide · Posted: Mon May 19, 2008 8:33 pm Post subject:

Which type do you need? With or without alfa control sender point. Which type of cap - sprung flat metal or black plastic?
_________________
Owner's Club 33 Registrar. Now from P4 & S2 1.7 QV
http://www.alfa-pages.co.uk/viewtopic.php?t=5188

baldy · Alfasud Joined: 23 Jan 2006 Posts: 67

Without alfa control sender point.metal or black plastic i think either will fit. can you post a picture of the two types so i can decide thanks paul.

ceci · Alfa Arna Joined: 17 Apr 2008 Posts: 15

any luck with the gearbox as i am interested
i have a brother-in-law in england.
he lives in gloucester is that very far from you?
if i can pay for the whole gearbox could it be sent to him?
he can then dissasemble and send me the parts'

i take it the gearbox and emc works and that both sensors are still on the box.

i urgently need this so a quick response would be appreciated rgds

paulhide · Posted: Tue May 20, 2008 1:17 pm Post subject:

Gearbox weighs nearly 5 stone so nearly 70 pounds so about 30 kilos so would cost a fair bit to send to Gloucestershire (another 40 quid?). There is no mesh sensor at the back of the box, but these are still available.
_________________
Owner's Club 33 Registrar. Now from P4 & S2 1.7 QV
http://www.alfa-pages.co.uk/viewtopic.php?t=5188

rob_mitch · Alfa Arna Joined: 26 May 2008 Posts: 2

Hi Paul,

I am interested in 16v engine bay strenghthening arms, however cannot get to NAD on 1st as I am autotesting on that day, unless I break it the day before.

Can you post to Bicester and if so, how much?

Thanks,

Rob
_________________
rob_mitch

paulhide · Posted: Tue May 27, 2008 7:56 am Post subject:

Yes have got a pair, will get back to you on postage.
_________________
Owner's Club 33 Registrar. Now from P4 & S2 1.7 QV
http://www.alfa-pages.co.uk/viewtopic.php?t=5188

mrmikecastle · Alfa Arna Joined: 22 Dec 2008 Posts: 3

Do you have a distributor for a 33 1.5 ie,this is really urgent !

many thanks
mike