View previous topic :: View next topic |
Author |
Message |
messybloke Alfa Arna
Joined: 29 Apr 2008 Posts: 23 Location: essex
|
Posted: Sat Jul 26, 2008 8:46 pm Post subject: cambelts whine & stuff |
|
|
Hi
Just finished changing my water pump on my 1.7ie (nice job ) and now my new cambelts or tensioners are whining like mad, has anyone got some cambelt/tensioner wisdom?
Also the revcounter reads about half RPM. Any idears?
Cheers. _________________ messybloke |
|
Back to top |
|
![](templates/subRed/images/spacer.gif) |
fluffyduff Alfasud
Joined: 23 Jul 2008 Posts: 57
|
Posted: Sat Jul 26, 2008 9:46 pm Post subject: |
|
|
Mine were a little noisy when i changed belts & tensioners but they settled down quite quickly. Just to be on the safe side I think I'd check the tensioners and pump even though they're new to make sure the noise isn't down to them and that the belts aren't too tight.
Presuming everything checks out, keep an eye (or ear) on it and it should come right.
Cant offer any advice on the rpm though. Hate electrics ![Laughing](images/smiles/icon_lol.gif) |
|
Back to top |
|
![](templates/subRed/images/spacer.gif) |
ZeNiTh-PbArM Alfa 33
![](http://alfaimola.free.fr/avatar.jpg)
Joined: 14 Mar 2003 Posts: 388 Location: Paris, France
|
Posted: Sun Jul 27, 2008 3:37 pm Post subject: |
|
|
Hi, belt whine means too much tension for the belts. Automatic tensioners on boxer are very poor at adjusting tension, this is due to the fact that 1° tightening the 17mm bolt on the tensioner arm causes said arm to rotate under the torque and overtighten the belt (8v engines) and 2° tensioners spring is designed to provide adequate tension for new belts, which will relax (read : expand) and release around 25% of the original tension over the first hundred miles. Tightening belts that have already stretched will give belt overtension, hence whine, will kill tensioner bearings, and will break sooner than scheduled (i've seen cases of broken belts after only 15 000 kms)
There is only one solution : dont trust tensioners and adjust tension by yourself, you can choose to be on the lower side of the tension scale for a daily runner (no high revs) or on the higher side for a racer but in that case you'll need to replace belts & tensioners often.
regards,
zp |
|
Back to top |
|
![](templates/subRed/images/spacer.gif) |
messybloke Alfa Arna
Joined: 29 Apr 2008 Posts: 23 Location: essex
|
Posted: Tue Jul 29, 2008 9:54 pm Post subject: |
|
|
Thanks, I will let off a bit of tension and see how it goes. _________________ messybloke |
|
Back to top |
|
![](templates/subRed/images/spacer.gif) |
|